Thingiverse
Multicolor Cactus Lamp
door Filippo_Meulli
259
Downloads
300
Likes
3
Makes
Hi everyone, this is my "Cactus Lamp".
The print is really easy and I hope you'll like it.
Instruction:
- "1_Cactus.stl", print with 0% infill and no bottom layer. The wall thickness must be 1.6 mm (you can rotate it 45° if your printer is not big enough, as I have done);
- "2_Plant_Pot.stl", you can print it normally (infill and wall as you want);
- "3_Joint.stl", you can print it normally (infill and wall as you want).
NO SUPPORTS ARE NEEDED!
Thank you, good printing!
The print is really easy and I hope you'll like it.
Instruction:
- "1_Cactus.stl", print with 0% infill and no bottom layer. The wall thickness must be 1.6 mm (you can rotate it 45° if your printer is not big enough, as I have done);
- "2_Plant_Pot.stl", you can print it normally (infill and wall as you want);
- "3_Joint.stl", you can print it normally (infill and wall as you want).
NO SUPPORTS ARE NEEDED!
Thank you, good printing!
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!