Multiconnect Shelf Bracket, Opengrid / Multiboard

Multiconnect Shelf Bracket (9mm) Wanted a shelf to store bulkier Items on my opengrid wall. made use of some spare MDF I had from some prior DIY. Designed the bracket so that the board can fully pass through the support, this allows you to use as many brackets as you need for longer runs boards need to be cut to 198mm to fit the 200mm hole. went with 200mm for the shelf depth to fit boxes of filament on. Included a screw hole for 3.5mm screws or bolts depending on your preference. Used PETG basic for my prints, I'm sure PLA would be fine or ABS would be stronger if you have it. all prints have 3 walls with 20% gyroid infill. have included both PLA/PETG with 0.4 or 0.6 nozzles. all files have 3 plates, Plates 1 and 2 have the model flipped so that you get the plate finish on the ends and if you want to print one at a time. plate 3 has both ‘sides’ on. credit to https://makerworld.com/en/@BlackjackDuck for his https://makerworld.com/en/models/650623-custom-gridfinity-shelf-multiboard-ope