Free Home Appliance Accessories STL Download - Multifunctional Adjustable Laptop Standby Maxs1221

Design ConceptThis convertible laptop stand combines versatility, ergonomics, storage, and airflow optimization in one 3D-printed design. Adjustable angles at 5°, 10°, 20°, and 30° not only improve screen height and typing comfort but also enhance cooling by increasing airflow to the underside of the laptop. The stand also supports a vertical orientation for compact storage and includes built-in slots for USBs and SD cards. Multiple print configurations are available to suit user preference: standard stand, stand with anti-slip stoppers, stand with support braces, or a combination of both. For secure clamping, two options are included: a rigid clamp (sized for the Dell XPS 15, 12 mm case + 5 mm screen) and a spring clamp for other laptop sizes. The clamp can be inserted into either the top or bottom SD card slot holders, enabling a perfect fit for both open and closed laptop use.Print SettingsPrinter: Ender 3 V3 KEPrint time: ~6 hoursLayer height: 0.2 mmInfill: 15%Material: Silk PLASupports: Enabled (no brim)The parts are sized to fit diagonally on the build plate at 45°, with additional room for clamps. If printing with braces, each brace must be printed separately due to their full diagonal length. Print two identical braces.AssemblyStandard Stand or Stand with Stoppers: Fully print-in-place, no assembly required.Stands with Braces: Insert the four pins on the stands into the brace holes. One brace must be inverted so they interlock into an “X.” For added rigidity, the two braces can be glued together at the center and at the pins.