Multifunctional Arm (Phone holder)

🆕 28.02.2025 new parts ⬇ Multifunctional arm for attaching mobile phone and other objects.All parts can be rotated by 22.5°.ArmThe arms are available in 5 lengths: 50, 75, 100, 150 and 200 mm. Each arm has a connection with a hole on one side and a threaded connection on the other. The threads and screws need to be loosened.ScrewsPrint screws with 3 perimeters for strength. It is necessary to turn the threads several times to make them turn smoothly.CornersUse the left or right corner to finish the arm and attach the mobile phone holder.Print on the side with the supports in the holes.BaseThe base has three parts: Base, Base Arm Corner and Screw.Base Arm Corner print on the side with the supports in the holes.ClampThe base can be attached with a clamp. The clamp has three parts: Clamp, Clamp screw and Clamp contact.The maximum mounting thickness is 50 mm.The bolt on the clamp is M14 and the internal thread has a tolerance of -0.1 mm.Print with 3 perimeters. Print the internal thread w