Thingiverse
Multimedia Wireless Boombox
by rmicro
1
Downloads
3
Likes
0
Makes
This is a wireless home music receiver originally designed for my kids to listen to music wirelessly via NFS or internet radio. At the moment I have made 2 pieces. The first one has already been working without problems for over 1 year.
Printing:
Use ABS plastic with a printing temperature of 230 degrees and a heated bed of 80 degrees. It is better to use 100% infill for stiffness, but options are possible. Any color can be used except "Face_bezel.stl", which must be transparent to allow light from the LEDs and signals from the infrared remote control to pass through. The parts can be processed after printing, I glued the cracks and painted black after putty. If the print quality is high, then you do not need to paint.
The assembly is shown in the video ► https://youtu.be/lL6zzCLZ9Yc
Screws required for assembly:
2,5x10
2,5x16
2,5x35
The front panel is assembled with a false panel and is simply clamped by the base and cover, which are tightened with screws. All detailed ins
Printing:
Use ABS plastic with a printing temperature of 230 degrees and a heated bed of 80 degrees. It is better to use 100% infill for stiffness, but options are possible. Any color can be used except "Face_bezel.stl", which must be transparent to allow light from the LEDs and signals from the infrared remote control to pass through. The parts can be processed after printing, I glued the cracks and painted black after putty. If the print quality is high, then you do not need to paint.
The assembly is shown in the video ► https://youtu.be/lL6zzCLZ9Yc
Screws required for assembly:
2,5x10
2,5x16
2,5x35
The front panel is assembled with a false panel and is simply clamped by the base and cover, which are tightened with screws. All detailed ins
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!