Multimorphic LED Breakout Standoff

This is a stand off / mount set for the Multimorphic LED break out board https://www.multimorphic.com/store/circuit-boards/rgb-led-breakout/ which is used in pinball machines to connect a header from the PD-LED to individual RGB LEDs or RGB flashers. These mounts place the break out board 20 mm below the playfield. The mounts are designed to accommodate 1/2 inch #6 wood screws. These models pictured were made of ABS plastic. Converting to PLA may require a slight downward rescaling due to ABS shrinkage. Caveat emptor: The screws passing through the break out board bite into the plastic. In the vibration laden environment of a pinball playfield this represents a potential point of structural failure. A remix using threaded inserts https://www.mcmaster.com/93365a130 is invited.