Thingiverse

MULTIPASS Version 3

by nmsr1196

7 Downloads

11 Likes

0 Makes

This is Multipass Version 3.
This is an upgrade from Multipass 2 (MP2).
The frame for MP3 is different from MP2.
This frame will support the Nextion 5" touch display.
**The badge holder only snaps into the Nextion display board
The parts are assembled with hot glue.

The nextion display configuration file (.HMI) which contains all the photos/pictures in the demo is located in the GitHub link below.
All the code, wiring, parts, etc.. are located on the Github page:
(https://github.com/nmsr1196/Multi_Pass_3)

Multipass Version 3 Overall Video:
(https://youtu.be/roMGa48RQ5Q)

Multipass Version 3 Features Video:
(https://youtu.be/7B_Nso75S9w)

3D printing adafruit audio cosplay cosplay prop display fifth element korbens taxi Korben dallas Leeloo Leeloo-Dallas leeloo dallas MultiPass The Fifth Element Touch Voice 3D printing adafruit audio cosplay cosplay prop display fifth element korbens taxi Korben dallas Leeloo Leeloo-Dallas leeloo dallas MultiPass The Fifth Element Touch Voice

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Why?

very large print

Single piece May need scaling or splitting

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

300 mm (Extra large)

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

No ratings yet

No comments yet – be the first!

MULTIPASS Version 3

Add to Collection