Thingiverse

Multiple Micro-Pump Holder System

von Christine86

5 Downloads

3 Likes

0 Makes

This is my 12th__’Thing'__, & also my 12th __'Fusion 360'__ design.

My other projects

Wire bobbin: https://www.thingiverse.com/thing:4946929
Flux Funnel: https://www.thingiverse.com/thing:4946257
Large Spool holder: https://www.thingiverse.com/thing:4816080
TUSH with Linear Bearings: https://www.thingiverse.com/thing:4815574
T-962 Modification: https://www.thingiverse.com/thing:4760915
Desiccant funnel: https://www.thingiverse.com/thing:4716424
Case for 3.5" VGA Display: https://www.thingiverse.com/thing:4291794
Sandpaper Holder with magnets: https://www.thingiverse.com/thing:4213700
Gear Driven TUSH: https://www.thingiverse.com/thing:4196767
Tight fitting Container & Lids: https://www.thingiverse.com/thing:4158760
Ride RD6006 Case: https://www.thingiverse.com/thing:4073804

Purpose:

I have several Marine aquariums, & for each of them, I need to administer medication, ultra-violet sterilization, buffer etc. I ended up having 4 or 5 micro-pumps eac

aquarium Copper strip din rail fish fish medication fusion 360 micro pump modular pump pump holder reverse osmosis RO Water Small pump waste waste water water pump aquarium Copper strip din rail fish fish medication fusion 360 micro pump modular pump pump holder reverse osmosis RO Water Small pump waste waste water water pump

Quelle

Thingiverse

Was du zum Drucken brauchst: Fortgeschritten Niedrige Konfidenz

Warum?

aufwändige Nachbearbeitung

Hardware nötig

Supports 1/3

Zusammenbau 2/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 2/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA

Nachbearbeitung

Kleben, Hardware

Software

Cura, PrusaSlicer o. Ä.

Gleicher Designer, mehr Plattformen

Christine86 veröffentlicht auch auf

2 zusätzliche Modelle auf 1 weiteren Plattformen

Printables

2 Modelle

♥ 23 ↓ 26

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Multiple Micro-Pump Holder System

Zur Sammlung hinzufügen