MakerWorld
Hueforge & Lithophane
Murder
by Corp
85
Downloads
76
Likes
26
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can adjust X and Y but Z must remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Gray Transmission Distance: 2PLA PolyLite White Transmission Distance: 5PLA BambuLab Basic Red Transmission Dist
Sign in to leave a comment
Sign in