Music Hue Forge

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 250x250mm in size. Be sure to only scale X and Y as needed. Z height must not change.You may print at higher layer heights below the Min Depth of 0.44mmThe Max Depth is 4.3mm and the Actual Depth is 2.7mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA+ Esun Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Green Transmission Distance: 2This print uses 7 unique filaments Swap Instructions: Start with Charcoal At layer #7 (0.92mm) swap to Marine Blue At layer #8 (1.04mm) swap to Blue At layer #10 (1.28mm) swap to Dark Red At layer #13 (1.64mm) swap to Orange At layer #15 (1.88mm) swap to Yellow At layer #17 (2.12mm) swap to Green At layer #19 (2.36mm) swap to Yel