Mustang

Project: Mustang.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.56mm and the Actual Thickness is 2.56mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #eb3b41 PLA Overture Matte Red Transmission Distance: 2.5 #74777d PLA Overture Matte Light Gray Transmission Distance: 0.3 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Red At layer #20 (1.68mm) swap to Light Gray At layer #23 (1.92mm) swap to White for the rest.