Slicer Discord
Mustang – 3D-printbaar model van MakerWorld MakerWorld
Hueforge & Lithophane

Mustang

67 Downloads
47 Likes
36 Makes
Model downloaden
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150.63x200.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Generic red Transmission Distance: 5 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Cotton White Transmission Distance: 1.5This print uses 4 unique filaments Swap Instructions: Start with Charcoal Black At layer #10 (0.88mm) swap to red At layer #17 (1.44mm) swap to Sunrise Orange At layer #22 (1.84mm) swap to Cotton White for the rest.
Categorie
Hueforge & Lithophane
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie