Thingiverse
N Scale Flex Track Guides
by TrainBox
3
Downloads
4
Likes
0
Makes
These are track guides for laying flex track.
Radii from 7.5"/191mm-9.5"/241mm
Curve segments are 25deg, segmented at 10deg/15deg.
Width is 4.45mm and slips right between Atlas and Kato rails... and given that's the gauge, it should work for any N Scale/Gauge track.
The straight section can just be scaled to whatever length you need, but is at 5"/127mm
The 7.5-8.5" radii may be problematic for some locos. 4 axle locos will likely manage just fine. BLI SW7 and Bachmann GP40 can handle these. The BLI cries closer to 7" (Bachmann not tested).
Radii from 7.5"/191mm-9.5"/241mm
Curve segments are 25deg, segmented at 10deg/15deg.
Width is 4.45mm and slips right between Atlas and Kato rails... and given that's the gauge, it should work for any N Scale/Gauge track.
The straight section can just be scaled to whatever length you need, but is at 5"/127mm
The 7.5-8.5" radii may be problematic for some locos. 4 axle locos will likely manage just fine. BLI SW7 and Bachmann GP40 can handle these. The BLI cries closer to 7" (Bachmann not tested).
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
