Thingiverse
N64 Controller Phone Clip Adapter
par Paranthrum
3
Téléchargements
1
Likes
0
Makes
This is an ADAPTER between the:
Nintendo 64 Controller
and
DJI Phantom 3 Standard Phone Clip
It is a modified N64 Memory Pack insert.
It is still a work in progress, and the dimensions have not been 100% confirmed but they should be close. Perform 2D slice tolerance test-prints before attempting full print
To create the whole assembly for this desired N64 controller phone clip, you will need the following:
(1) Nintendo 64 Controller
(1) N64 Memory Pack insert / Phone Clip Adapter fully printed
(1) round/cylindrical bar that is (5mm Diameter) and (20mm Length)
(2) M2 x 18 screws
(1) DJI Phantom 3 Standard Phone Clip as pictured below
https://www.phantomhelp.com/Tips/Images/P3S-0004s.jpg
https://i.ebayimg.com/images/g/RzgAAOSwdHxbqbxl/s-l640.jpg
Nintendo 64 Controller
and
DJI Phantom 3 Standard Phone Clip
It is a modified N64 Memory Pack insert.
It is still a work in progress, and the dimensions have not been 100% confirmed but they should be close. Perform 2D slice tolerance test-prints before attempting full print
To create the whole assembly for this desired N64 controller phone clip, you will need the following:
(1) Nintendo 64 Controller
(1) N64 Memory Pack insert / Phone Clip Adapter fully printed
(1) round/cylindrical bar that is (5mm Diameter) and (20mm Length)
(2) M2 x 18 screws
(1) DJI Phantom 3 Standard Phone Clip as pictured below
https://www.phantomhelp.com/Tips/Images/P3S-0004s.jpg
https://i.ebayimg.com/images/g/RzgAAOSwdHxbqbxl/s-l640.jpg
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
