Thingiverse
Nail Polish Tower
66
Download
81
Likes
0
Makes
A compact nail polish tower for 48 standard 12mm bottles (maximum size 30x30mm). It has a tray in the bottom for brushes or files, and holds bottles at an angle of 50 degrees. It take about 1/3 of the volume of a standard tiered rack. It's surprisingly stable with any number of polishes in it.
---
It's important to use an 0.5mm line width since all the walls are 2mm thick. This will save you several hours in printing! The .stl is oriented the wrong way - make sure it's base-down in the slicer.
The model is 82.1X x 194Y x 220.4Z with a maximum overhang of 50 degrees. I printed it in around 20h and 330g of filament using a 28mm layer height at 120mm/s.
---
It's important to use an 0.5mm line width since all the walls are 2mm thick. This will save you several hours in printing! The .stl is oriented the wrong way - make sure it's base-down in the slicer.
The model is 82.1X x 194Y x 220.4Z with a maximum overhang of 50 degrees. I printed it in around 20h and 330g of filament using a 28mm layer height at 120mm/s.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!