NAMI (One Piece)

Project: nami4.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 95.98x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA Generic azul medio Transmission Distance: 2 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Beige Transmission Distance: 8This print uses 6 unique filamentsSwap Instructions: Start with Army Blue At layer #8 (0.72mm) swap to azul medio At layer #12 (1.04mm) swap to Brown At layer #17 (1.44mm) swap to Orange At layer #21 (1.76mm) swap to Sakura Pink At layer #22 (1.84mm) swap to Beige for the rest.