Nangong Yu: Zenless Zone Zero

Hello hello, All AoD members are here, good luck everyone pulling to them. Notes: Please only scale the X and Y dimension, do not change the Z dimension This file may take a while to slice due to the amount of detail, please be patient. You can simplify the model but at most at high setting. Medium or lower you will see sharp folds and dents on the print of the print. If printing without the 3MF file, please set initial layer to 0.16mm and subsequent layers to be 0.08mm. Feel free to change the base colour filament to any colour of your choosing Both hexagon and rectangle format are available to be downloaded Filaments Used: PLA BambuLab Basic Magenta Transmission Distance: 4.5 PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Cyan Transmission Distance: 4 PLA BambuLab Basic White Transmission Distance: 5 Swap Instructions: Start with Magenta At layer #7 (0.64mm) swap to Black At layer #11 (0.96mm) swap to Cyan At layer #16 (1.36mm) swap to White for the rest. Catc