Thingiverse
Nanight Tech 2 handle
di barmo
3
Download
1
Likes
0
Makes
This is a remix of this handle: https://www.thingiverse.com/thing:421510
I have adjusted the mounting plate so that the light does not pivot on the rear screw. It is now mounted flush with the plate. Using the 4 holes you can use cable ties to secure the light to the plate in addition to the screw.
I have also made room to make M6X25 screws to be able to be inserted from the inside-out. This way you can use wingnuts to secure the handle to the plate.
I have adjusted the mounting plate so that the light does not pivot on the rear screw. It is now mounted flush with the plate. Using the 4 holes you can use cable ties to secure the light to the plate in addition to the screw.
I have also made room to make M6X25 screws to be able to be inserted from the inside-out. This way you can use wingnuts to secure the handle to the plate.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
