NanoDlp Parasite box

The project aims to make it easier to connect NanoDLP to a typical LCD resin printer.


-Parts Required


1. raspberry pi 4/3b+

2. mks gen L 1.0 (!CAUTION!) This board determines the output voltage according to the input voltage. 12v/24v. Therefore, be aware of the PSU you want to use.)

3. m3 bolts/nuts (various lengths), m2.5 bolts/nuts (various lengths)

4. Power switch (in my case, KCD1-101A). Modify the siwtch hole size to use the switch you want)

5. Push switch for raspi shutdown (not required because it provides a shutdown option on Nanodlp)

6. 60x20mm DC cooling pan = case cooling fan

7. 5v dc to dc step down converter (for raspi power supply)

8. soldering tool

9. dc input cable (select according to the PSU you want to use)

10. 24v/12v PSU

11. usb c charge cable

12. Micro 5pin cable

13. Micro/mini hdmi to hdmi cable/gender(To meet the specifications of the raspi you use)

14. LCD ls055r1sx04+hdmi to mipi (depending on the LCD you want t