NanoKVM case

Case for NanoKVM (Lite). I am not happy with any case design I can find for it on the web. Couple key complications with it that made other designs less than perfect: 1. There is absolutely no surfaces intended to be mounting points. 2. HDMI mounted on two pairs of header pins and main board is thin, only 1MM an flexing a lot. With newer and stiffer HDMI plug there is real possibility to crack the main board and bent those structural headers. I need to unload all axial stress from HDMI. So here I am making my own case. I've tried to use model of the board from GitHub but it appeared broken, but model embedded in PDF appeared fine, but I am not able to extract it. Rather than troubleshoot - I made my own. It's very rough, not worth public attention but allowed me to fit and finish my case design. The version I have uses header pins to mount HDMI mezzanine. Apparently there is another version around with brass standoffs (see last image). I have no idea if version with standoffs has the same offsets for the HDMI connector, so be careful. Resulting case, after many tweaks, appeared exactly as I wish it to be, aesthetically and functionally. It has pseudo-interference fit instead of using any fasteners. it came-up very compact and sturdy. Very easy to print. No supports and no usual cleanup needed. Hope somebody find it useful.