Naruto Hueforge

Project: Naruto.jpgPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 145.86x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #ff9016 PLA BambuLab Basic Orange Transmission Distance: 5.5This print uses 3 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Jade White At layer #23 (1.92mm) swap to Orange for the rest.