Naruto Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: was from a local shop. local brandit is PLAThis print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.56mm) swap to Red At layer #13 (0.72mm) swap to Orange At layer #18 (1.12mm) swap to Yellow for the rest.