Naruto Hueforge

Naruto Hueforge!Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 172x215mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Orange Transmission Distance: 7PLA BambuLab Basic Yellow Transmission Distance: 4PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments