Naruto Konan Hueforge

Project: 01 (32).pngPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 146.1x200mm in sizeYou may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 2.4mm and the Actual Depth is 2.5mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA PolyLite White Transmission Distance: 5This print uses 3 unique filaments Swap Instructions:Start with BlackAt layer #16 (1.36mm) swap to Blue Gray Border Only Colors from here until the end.At layer #23 (1.92mm) swap to White for the rest.