Naruto Mahjong

为我助力给我助力，继续开发周边~感谢！2026.1.13更新：新增单色打印配置（无AMS也可打印），需装配单色打印总共需要4种颜色，红、白、蓝、绿，单色打完换色即可各色以分盘，打印次数和颜色都已经标注好单色打印最好刷胶，方便离盘零件较小，零件做好收纳，防止丢失单色打印，麻烦的就是装配，小锤敲敲敲….很是解压大部分的零件卡的还是很紧的，胶水用来辅助，点胶时请注意适量 Monochrome printing requires a total of 4 colors: red, white, blue and green. Simply switch the color after printing each single color.Each color is arranged on a separate tray, with the printing times and corresponding colors clearly marked.It is recommended to apply glue before monochrome printing for easier removal of parts from the tray.The parts are relatively small. Please store them properly to avoid loss.The most troublesome part of monochrome printing is assembly, but hammering with a small hand hammer is quite relieving.Most parts fit tightly. Glue is only for auxiliary use. Please make sure to use an appropriate amount when dispensing.单色打印很是挑战打印参数，务必测试好在打印单色条牌配色装配参考如下（AMS打印配置也会更改如下配色）…………………………………………………完全保留了传统麻将的玩法,包含整副麻将共144张图案进行了重新设计，尽量满足视觉识别，颜色也遵循了传统麻将的配色没有支撑，我用PETG打印，请根据自己的材料调整参数分色及分盘全部整理好了