Naruto - Sharigan Bookmark

Project: Sharigan.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.7mm and the Actual Depth is 1.7mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA Rosa Starter Grey Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Grey At layer #14 (1.2mm) swap to Jade White for the rest.