Naruto six path bookmark hueforge

If you like it rate me!Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 50x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.7mm and the Actual Depth is 1.7mmSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #10 (0.88mm) swap to Yellow At layer #15 (1.28mm) swap to White for the rest.