Naruto Sixth Path Sage Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x247.58mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3.1mm and the Actual Depth is 2.6mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Orange Transmission Distance: 7 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Blue At layer #12 (1.04mm) swap to Orange At layer #21 (1.76mm) swap to Savannah Yellow At layer #27 (2.24mm) swap to Jade White for the rest.