Naruto with backlight effect

Hueforge of Naruto with backlight effect The photos shows the result in 150.05x200mm and a nozzle of 0.4 You can change the X and Y dimensions but do not change the Z dimensions You must define the printing parameters indicated in the description below and change the filament at the specified heights. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge description Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm The Model is 150.05x200mm in size You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 2.44mm and the Actual Thickness is 2.2mm #ff6a13 PLA BambuLab Basic Orange Transmission Distance: 7 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #8e9089 PLA BambuLab Basic Gray Transmission Distance: 2 This print uses 5 un