Slicer Discord
Native American - Hueforge – 3D-Druckmodell von MakerWorld MakerWorld
Hueforge & Lithophane

Native American - Hueforge

78 Downloads
41 Likes
47 Makes
Zum Modell
This is 4 colour HueForge of a Native American with Horse. I uploaded two sizes 165x200 X1/P1/A1 and size 148x180 for A1 Mini.And thicker version with no border size 165x200. Swap instructions in profile description. Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Boost MeI print all of my creations myself.If you like my work, pls send me a boost, it will help me make more.Feel free to PM me if you have some idea for a nice picture.Thank you. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 165x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2mm and the Actual Depth is 1.8mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 4PLA BambuLab Basic Gray Transmission Distance: 1.6PLA Sunlu Matte Wh
Kategorie
Hueforge & Lithophane
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Fortgeschritten Mittlere Konfidenz
Warum?
4 Farben · großer Druck
Einteilig 4 Farben / AMS
Supports 1/3
Zusammenbau 0/3
Einstellungen 3/3
Druckbett 2/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Mindest-Druckbett
200 mm (Groß)
Farben
4 (AMS/MMU empfohlen)
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen