Nazgûl - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 1.3mm and the Actual Depth is 1.4mm Filaments Used: PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3 PLA Spectrum Basalt Grey Transmission Distance: 0.6 PLA HIGH SPEED 3DPower Telegrey Transmission Distance: 3.1 PLA HIGH SPEED 3DPower Pure White Transmission Distance: 2.3This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Basalt Grey At layer #9 (0.8mm) swap to Telegrey At layer #13 (1.12mm) swap to Pure White for the rest.