NCase M1 Feet

Standard feet of the NCase M1 aren't that great looking, plus I needed some height so I could attach fans at the bottom of my case to free the inside for a radiator.

This gives enough clearance for 15mm thick fans. ( Used the following Noctua fans: https://noctua.at/en/products/fan/nf-a12x15-pwm )

The front feet have holes in them to route fan cables through inside the case, I'd recommend to use some fan extension cables or a fan controller in the front of the case.

The bracket from left to right feet is to prevent the feet from rotating, as they are only screwed in by the default one screw.

Recommend to put some anti slip at the bottom.