NCase M2 Reverse PSU Bracket

Hello Everyone! This bracket is intended for the Ncase M2 and fits on the opposite side panel. The idea was offsetting the PSU to make it possible to fit a 140mm fan next to the motherboard. It also allows for better routing of the power cables. Print Recommendation Use at least 4 walls. I used 6 in the print profile. 25-35% infil. Remember, this bracket holds your PSU potentially just above your GPU… I also recommend a tougher filament, such as ABS or ASA, for heat resistance. Fibre-reinforced filaments may also provide you with better dimensional accuracy and diminish warping. The print pictured uses ABS GF from Bambu with 6 walls, 35% rectilinear infill, 60-70 mm/s speed, and no fan cooling. Multiple versions are available. [m3 screws]: Holes made for the M3 screws that come with the case. Essentially, force tap it by screwing directly into the plastic. Not elegant, but it will work. (The pictures above are using this version) [Heat Insert]:To be used with M3 heat inserts that are 4