Nebula camera mount

camera mount for ender 3 V3 KENew completelly adjustable camera mout.Convenient placement. Easy print. Easy mout. Adjustable.For standard version:Support use same fixation as nebula pad (you will need 5mm longer M4 bolts) or there are a version of support for creality enclosure.Remove screen support, change bolts for longer ones and fix support [part 1] and nebula pad together.Mount bolt [2] and bush [3] with stem [4] and fix it on support [1] hole with nut [5].Mount another bolt [2] and bush [3] on existing stem [4] and fix it on platform [6] hole.Fix Nebula cam on platform [6] .Adjust position as your preference.Nut [5], Bolt [2] and bush [3] you will need 2 of each. Other parts print 1 of each.For extended reach version (optional)Extended reach version need more parts to be printed.One more bush [3], stem [4] and nut [5].You will need one clamp [7] and one longer bolt [8].This extended version will increase the reach for the fron of printer and placement options will be almost infinite.Stem [4] and bolts [2] and [8] should be printed horizontally for better stenght.Other than that print is easy with few supports.I used PETG for my parts because it is less brittle than PLA.You can use my cable holder for wire organizationCompatible nebula pad cover:https://www.crealitycloud.com/model-detail/6818f206bf737a7e52f16fc0?source=22