Neopixel ringlight with cold shoe mount

This is a bit of a tweak to the Adafruit Neopixel ringlight project that can be found at https://learn.adafruit.com/3d-printed-camera-led-ring/overview

I liked the idea but I wanted to change the way the light mounted on the camera. I wanted to move the control box away from the lens and switch to a end-of-lens mount for the light. I wanted to add a way to switch colors, as using neopixels only for white light seemed like a waste. I also wanted to build-in the battery charger so that charging was easier.

So, I redesigned the housing and added a color select button and a USB li-po charger. All of the parts are friction fit, with the controls in stacked boxes within an enclosure with a cold shoe mount.

The parts used for this were:
24 LED neopixel ring: https://www.adafruit.com/product/1586
500 mAh Li-po battery: https://www.adafruit.com/product/1578
Mini li-po charger with usb port https://www.adafruit.com/product/1905
5v adafruit trinket: https://www.adafruit.com/product/