Neos camera mount for bird box camera

I put a Neos camera inside a bird box and needed a part to hold it to the ceiling of the bird box. The bird box was about 300mm high. You probably need a reasonable height bird box due to the Neos field of view.

You will need to print (I used PLA) out one cage and two brackets. Glue the brackets to the cage with superglue and then use small srews to hold it in place (with camera inside). You'll need to remove the base from the Neos camera before inserting it into the cage.

The camera has been working OK through the winter and hopefully we'll have some birds nesting in the spring.