Nerf M203 frame

These are the files for the stand alone stock for the Nerf M203 launcher.

In addition to the printed parts, it uses 2 ea. 1/2IN. 1/8IN. aluminum flat bars to complete the stock. the length of the bars is determined by how long you need the stock to be. it also uses 6 ea. M3-12 cap head screws and nuts.

for printing, I ran it with Overture PLA+. the following are the settings that I used

.2 layer height
5 walls
40% infill (cubic subdivision)
print speed 65mm/s
print temp 215c
bed temp 60c
Supports: YES
adhesion: brim (for the frame adapter only)