Thingiverse

Nerf Mediator Modulus Stock

by madsurfer

11 Downloads

12 Likes

0 Makes

I did not find any simple and fast stock for my kids nerf mediator, so I made this one
I takes about 2:30 hours to print, it should work on any spring nerf
Glue it with hot glue, or use a bit of eletrical tape to eliminate the gap between the stock and the nerf gun, so that it enters more tightly
Rotate the stock on your slicer, so that it prints with no supports

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

30 h

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Nerf Mediator Modulus Stock need supports when printing?

No supports needed for Nerf Mediator Modulus Stock — it's designed to print clean off the bed.

How long does it take to print Nerf Mediator Modulus Stock?

According to the design notes, Nerf Mediator Modulus Stock takes approximately 30 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Nerf Mediator Modulus Stock available in?

Nerf Mediator Modulus Stock is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Nerf Mediator Modulus Stock free to download?

Yes, Nerf Mediator Modulus Stock is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Nerf Mediator Modulus Stock

Add to Collection