Nerf Scope With Customizable Lense

Description:This model is a Scope for nerf blasters. It is styled like a Red-Dot. This will fit any nerf rail. There is no lens or markings printed, but that is for you to make to your choice. Lens:As said in the title, this has a custom lens option. There is nothing to print, but rather a DIY craft. (you do not need to follow steps 4+ if you want it to just look cool)Step 1: Get a plastic container(For mine, I used the clear plastic from a box of blueberries). Step 2: Cut out the container until it fits roughly. I'd estimate a 25x25 square to start, and then trim down. Step 3: Place on your gun. There is a slot on the 3d model where this goes. You may need to use some glue to keep it on. I lost 3 lenses. Step 4: While looking through the blank scope, shoot a still target until you find a point on the clear lens that is roughly where the bullets hit. My gun was shooting to the side, so I had to put my markings towards the left. All that matters is accuracy. Step 5: Use a sharpie or