Thingiverse
NES replacement for locking mechanism
by Ungetoast
2
Downloads
3
Likes
0
Makes
This is a replacement part for the locking mechanism in for the NES cartridge.
The if the original part is broken like mine (second picture) this might come in handy, because i found no shop to buy a replacement part or another 3d file.
It is very fiddly to print, because the tolerances are around 0.25mm but when my Anycubic Kobra was able to do it your printer can probably handle it too. I would recommend printing it at an angle so the top face is printed as smooth as possible.
The model is not perfect but it worked for me.
good luck! :)
The if the original part is broken like mine (second picture) this might come in handy, because i found no shop to buy a replacement part or another 3d file.
It is very fiddly to print, because the tolerances are around 0.25mm but when my Anycubic Kobra was able to do it your printer can probably handle it too. I would recommend printing it at an angle so the top face is printed as smooth as possible.
The model is not perfect but it worked for me.
good luck! :)
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
