NEW HueForge LED Frame!! Two colors and diffuser

UPDATE: Added 100x100 and 200x200 framesAll models have been updated to be able to insert other LED strip also inside the frame, to illuminate the HueForge from the front. I saw that the current hueforge frames are too simple for my taste and I chose to make more complex models, in various colors and that could be illuminated with LEDs on the back. This is my first model: 200x200 / 150x150 / 100x100.The LED strips used can be 8 or 10mm thick. I use 8mm 5v with SMD 2835 White leds. I use a USB cable with a remote that allows you to switch between 2 different LED strips (3 cables). The 5v is common, and then each wire to the negative of a strip. The installation process is simple:The LED strips is glued around the perimeters of the frame (int and ext). The cable is inserted through the upper holes as needed towards the center of the frame or towards the top. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000559048/design/2024-07-