Slicer Discord
Neximage 10 Cable Support – 3D-Druckmodell von Thingiverse Thingiverse

Neximage 10 Cable Support

0 Downloads
0 Likes
0 Makes
Zum Modell
I needed a way to support the usb cable that was connected to the Neximage 10 camera. I was working on a different approach when I found the cable support created by srstuart.

Slide the usb cable through the support and attach it to the Neximage 10 camera. Then slide the camera back into the support. To remove the camera from the support push on the usb cable and the camera will slide out of the support.

The camera is fairly tight fit with very little play in the support. The cable fits into the slot with more play but should still be able to protect the camera's usb connector.
Quelle
Thingiverse
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen