Nextion 3.2 display mod

A quick nextion 3.2 inch display mod for the thrustmaster t300 70mm wheel.

https://www.thingiverse.com/thing:4891321

All the original screws can be used, although some longer screws might be better since the thread on the smaller ones will not grab the thread a lot.

Print it with infill 30%+.
4 brass inserts m3x4 are required to be melted in the bezel.
For the case you need four M3x10 screws, allen screws preferred.

You will need to desolder the connector of the Nextion display so it will fit in the housing.
Also, a USB to TTL is required. I have desoldered the headers and stuck it onto the nextion with some double sided tape