Nezuko Hueforge - Demon Slayer

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mmThe Model is 111.96x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.6mmThe Max allowed Thickness is 2.36mm and the Actual Thickness is 2.35997mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #cd007b PLA BambuLab Basic Magenta Transmission Distance: 3 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.76mm) swap to Magenta At layer #12 (1.08mm) swap to Beige At layer #18 (1.56mm) swap to Magenta At layer #20 (1.72mm) swap to Jade White for the rest.