NF Sunrise part cooling solution

Needed a great part cooling solution to fit them all (printers). Took Eva 2.0 platform cooling shroud and made it fit the NF Sunrise. Made an adapter for 5015 blower fan.

Print with supports on build plate, or paint on the supports for the mounting brackets as shown on the picture.

I have printed the tips separately in PET as its has heat resistance, and just glued them on the main body that was made in coPET.

Mounts to the side holes on the extruder with 2 M3x1 bolts and offers height adjustment

Order of installation:
- print the parts;
- insert 2 M3 nuts in the premade holes on the shroud;
- use 2 M3 bolts to secure the shroud to the NF Sunrise extruder but don't make it tight;
- lower the extruder so the nozzle touches the build plate;
- place a 2-3 mm shim near the nozzle and place the shroud on top;
- hold it in place and tighten the screws;
- preinstall the fan on the adapter;
- insert 2 M3 bolts and bolt the adapter to the shroud.

v2

New version adds