NFC Tag reader esp32 USB-C

Tag Reader for Home AssistantThe tag reader is a simple to build/use NFC tag reader, specially created for Home Assistant. It is using a esp32 and the PN532 NFC module. The firmware is built using ESPhome.I mainly use this to allow my kids use spotify playlists to play on speakers. (The URL of the spotify playlist is stored on the NFC Tag)Please also look at the Githib repo: https://github.com/leinich/tagreaderBuilding the tag readerTo build your own tag reader, you need the following components:esp32 (in my case: D1 ESP32 Mini Wroom USB-C) - https://amzn.to/49qhjllPN532 NFC Reader - https://amzn.to/3wlqll0WS2812 Led Piezo Buzzer (KY-012) - https://amzn.to/3UOuI2kSome wires and solderI used PLA (white for LED, grey for NFC Logo and black for case)Connecting the components Also, make sure that you have set the switches on the PN532 to utilize I2C the following:Switch 1: On (up)Switch 2: Off (down)This enables the PN532 module to communicate with the GPIO21/22 over I2C, and is required f