Thingiverse
NFT Hydroponics System
von matou_makes
292
Downloads
154
Likes
0
Makes
This is a small 3D printable hydroponics system. It requires a small water pump and a tube to pump water through.
Warning: The water reservoir might need coating with something waterproof, such as epoxy. PLA generally leaks after a while. I also coated the water channels and the swimmer with epoxy.
The idea is that the reservoir holds a nutrient solution (look for hydroponic nutrients), which gets pumped up with a small water pump. The nutrient solution then flows along the water channel. A plant holder on top places the roots of the plants in the water channel. For that, I wrap the stems of the plant in foam rubber, so that they sit firmly in the holes.
You can see the pump that I use in the pictures.
A video of the build is available here: https://youtu.be/2em0Q3HlyuI
Warning: The water reservoir might need coating with something waterproof, such as epoxy. PLA generally leaks after a while. I also coated the water channels and the swimmer with epoxy.
The idea is that the reservoir holds a nutrient solution (look for hydroponic nutrients), which gets pumped up with a small water pump. The nutrient solution then flows along the water channel. A plant holder on top places the roots of the plants in the water channel. For that, I wrap the stems of the plant in foam rubber, so that they sit firmly in the holes.
You can see the pump that I use in the pictures.
A video of the build is available here: https://youtu.be/2em0Q3HlyuI
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
