NICO ROBIN (One Piece)

Project: nico.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 85x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Army Blue At layer #9 (0.8mm) swap to Gray At layer #11 (0.96mm) swap to Beige At layer #18 (1.52mm) swap to Sakura Pink At layer #24 (2mm) swap to White for the rest.