Thingiverse
Nightstand
von johanes
11
Downloads
8
Likes
0
Makes
A nightstand for my Nexus 4 with a place for the Qi charger from xsource.
First draft made from plywood. Then cut from 3mm acryl glass. The parts are interchangeable, so a material mix gives flexibility in design.
The place for the charger is off the center, because the charging spot on the nexus is not in the center of the phone. Works also with a Nexus 5.
Built at the FabLab Nürnberg
http://www.fablab-nuernberg.de/
First draft made from plywood. Then cut from 3mm acryl glass. The parts are interchangeable, so a material mix gives flexibility in design.
The place for the charger is off the center, because the charging spot on the nexus is not in the center of the phone. Works also with a Nexus 5.
Built at the FabLab Nürnberg
http://www.fablab-nuernberg.de/
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!