Nimitz-Class Aircraft Carrier尼米兹级航母

Nimitz-Class Aircraft Carrier Remember to clean the PEI build plate before printing to ensure good adhesion, and make sure the filament is dry. The model uses about 40g of material and takes approximately 2 hours and 16 minutes to print. Recommended settings: PLA, 0.12mm layer height, 2 wall loops, and all acceleration values at 1000 or below. 尼米兹级航母 打印前记得清洁好PEI打印板，保证其粘度OK，确保材料干燥 模型用料40克，时长2小时16分。 PLA，0.12层高，2层墙，加速度全部1000或以下。